Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Valve Cover of the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the valve cover of the BMW 3 Series, open the hood to access the engine compartment and remove the upper cover. Once this is removed, you will be able to access the underlying components, such as the connectors that need to be disconnected, as they are obstructive parts.

Consequently, you will need to unscrew all the bolts around the valve cover. When all the bolts are removed, you can lift the cover and take it off, replacing it with a new replacement part.

After the replacement, install all the removed parts.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2005-2013 / E92, E90, E91) To remove and lift the valve cover, first completely disassemble the cabin air filter housing and stabilizer bars; continue by freeing the wiring har…
BMW Serie 3 (1998-2006 / E46) For the vehicle in question, the valve cover gasket consists of two pieces: a central one and the perimeter gasket of the cover itself. Once the gask…
BMW Serie 3 (1998-2006 / E46) Start by disconnecting the plastic cable pass-through located just below the windshield to remove the cabin air filter and disassemble the supporting…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos