Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery on a BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Key

To replace the battery in the remote for a BMW 1 Series, press the button located at the bottom of the device to extract the key and its cover. Once these parts are removed, use a tool to pry inside the key housing to detach the cover from the back of the remote. Underneath, you will find the battery, which can be removed from its housing and replaced with a new spare part. After replacing the battery, reattach the back cover and insert the key.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW 1 Series Remote Key?
How to Replace the Battery in a BMW 1 Series Remote Key?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the battery in the BMW 1 Series remote key, lever open the groove that separates the two halves of the remote using an object like a screw…
How to Replace the Remote Battery on a BMW 1 Series?
How to Replace the Remote Battery on a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the remote battery on the BMW 1 Series, press the button located at the top of the device. This will allow you to slide the key out from t…
How to Change the Remote Battery in a BMW 1 Series
How to Change the Remote Battery in a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this short video tutorial, you will see how to replace the old battery in the remote of a BMW 1 Series from 2011 to 2019. To start, extract the re…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos