Do it yourself
Frequently asked questions about cars and motorcycles

Fuel Pump Disassembly Instructions

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Pump

The fuel pump is located under the rear seat, on the passenger side, and is installed directly inside the tank. Once you remove the seat and the rubber protective cap, disconnect the connector and the hoses. Then, unscrew the pump retaining ring (you can tap on one of the ribs with a screwdriver and hammer) and pull the pump out of the tank along with the bucket and float, being careful not to lose the gasket underneath inside the tank. Generally, you can purchase just the motor for the pump overhaul in the aftermarket.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…
BMW Serie 3 (1998-2006 / E46) These brief and simple instructions will show us the main steps on how to disassemble and replace the fuel pump of the BMW 3 Series 325i. First, we o…
BMW Serie 3 (1998-2006 / E46) Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos