Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Car handle replacement

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Handle
Operation: Car handle replacement

Changing the handle of your car is an operation that can also be done alone, without having to go to a body shop. Car handles are not only designed to open the door but also for the safety of passengers, to allow them to get out of the car even in the event of an accident. Usually, the screws that secure the handle are easy to unscrew. First you need to remove the inner door panel and the screws that secure the inner plastic cover. Once all the screws have been removed, it will be necessary to remove the door cover and observe, from the inside, the handle block which will be fixed by means of screws inside the door. It has to be unscrewed and removed, so that the job can be completed later.


Posted on 13 August 2023 by ScegliAuto



Replacement of the handle of your car
BMW X5 (1999-2006 / E53) The handles of our car are among the objects most affected by wear. The guide shows how to replace them without necessarily resorting to the help of
How to replace the inside handle on BMW X5 Series
BMW X5 (2007-2013 / E70) How to replace the damaged leather interior door handle on a BMW X5 Series? With a lever, remove the plastic (covering) placed above the internal han
How do you replace the outside handle on a BMW X5?
BMW X5 (2007-2013 / E70) To remove the external handle of the BMW X5, you need to open the door and locate a hole that is located at the end of the external handle. Inside th

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos