Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Fluid in a BMW 5 Series?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Transmission fluid

See other generations:
Video tutorial

In this tutorial, you will see how to replace the transmission fluid in a BMW 5 Series. This is a simple operation but requires good manual skills.

First, lift the vehicle. If it is 4WD, disconnect the driveshaft.

Next, remove the two indicated bolts using an 8mm hex wrench and a 10mm wrench. Drain all the fluid from the transmission and reinstall the drain plug.

Continue by removing all the bolts securing the oil pan, separate it from the transmission, and clean out any residue of the old fluid inside. Finally, add the necessary amount of fluid through the upper hole.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
When and How to Replace the Timing Chain on the BMW 5 Series
When and How to Replace the Timing Chain on the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Replace the timing chain on the BMW 5 Series with a gasoline engine after 155,000 miles or ten years; however, after this time or mileage, the manufa…
How to Replace the Hood Release Cable on a BMW 5 Series E39
How to Replace the Hood Release Cable on a BMW 5 Series E39
BMW Serie 5 (1995-2003 / E39) In today's tutorial, you will learn how to replace the hood release cable on a BMW 5 Series E39 by following these simple steps. First, open the fron…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos