Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Turn Signal Bulbs on a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

In this tutorial, you will see how to replace the front turn signal bulbs on a BMW 3 Series, a very simple task. Before proceeding, ensure the key is not in the ignition for safety. Start by lifting the side you will be working on with a jack, then remove the wheel and locate the small access panel on the front of the fender. Once removed, open the additional circular plastic cover, disconnect the power connector, and extract the bulb by unlocking the metal clip. To install the replacement and reassemble everything, simply follow the reverse procedure.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will learn how to remove and replace the windshield wiper relay and the turn signal relay on a BMW 3 Series. First, get inside the vehicle…
Resetting the BMW 3 Series E90 Light Bulb Warning Light
Resetting the BMW 3 Series E90 Light Bulb Warning Light
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, we will see in this video tutorial how to reset the light bulb warning light in a BMW 3 Series E90 by following these simple steps. First, get…
How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the angle eyes position light bulbs on a BMW 3 Series E90 is very simple. Follow these steps in this tutorial. First, lift the car with a j…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos