Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console of the BMW X5

Model: BMW X5 E53 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Center console tunnel

See other generations:
Video tutorial

In this guide, follow the steps to remove and replace the center console of the BMW X5. First, get inside the vehicle and start by removing the glove compartment located at the rear, as well as the one inside the armrest; then unscrew the screws found underneath, as shown in the video.

Next, remove the shift knob and the shift boot, also taking off the boot of the parking brake lever; remove the side plastics of the center console and unscrew all additional screws to detach and remove it, disconnecting all electrical connectors!


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Handbrake Button on a BMW X5?
How to Replace the Handbrake Button on a BMW X5?
BMW X5 (2007-2013 / E70) To replace the handbrake button on a BMW X5, use a tool to pry off the trim that surrounds the center console. Once removed, proceed to loosen the sc…
Removing Car Radio and Installing Alpine HCE-C500 Kit
Removing Car Radio and Installing Alpine HCE-C500 Kit
BMW X5 (2007-2013 / E70) Use a plastic pry tool to detach the air vents located just above the climate control buttons, disconnecting the connectors attached to them; remove …
How to Remove the Center Dashboard Panel of the BMW X5?
How to Remove the Center Dashboard Panel of the BMW X5?
BMW X5 (2007-2013 / E70) To remove the center dashboard panel of the BMW X5, open the glove compartment located on the passenger side. This allows you to pull out the air ven…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos