Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Windshield Washer Reservoir Grommets

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windshield wipers

If you notice fluid leaks near the rear of the front right wheel (passenger side), it is likely that there is a leak from the windshield washer reservoir. To access the reservoir, lift the vehicle using a jack stand and remove both the wheel and the plastic wheel well. Once you locate the reservoir, check for any damage: if it is intact, the leak is likely due to a loss of seal from the pump grommets. Disconnect the power connectors, remove the pumps, and replace the sealing grommets. Once everything is reassembled, fill the reservoir and ensure there are no more leaks before reinstalling the wheel well.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fuel pump on the BMW 5 Series?
How do you replace the fuel pump on the BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) In order to replace the fuel pump of the BMW 5 Series, it is necessary to go to train the bolts that secure the protective plastic cover. Once remove…
Valve Guide Seal Replacement
Valve Guide Seal Replacement
BMW Serie 5 (1988-1995 / E34) When replacing the head gasket, it is good practice to also replace the valve guide seals: use the appropriate arch clamp to compress the return spri…
How to replace the windshield washer pump on the Series 5.
How to replace the windshield washer pump on the Series 5.
BMW Serie 5 (2003-2010 / E60, E61) If we want to proceed with replacing the windshield washer pump on this car model, in the following description we have gathered all the useful infor…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos