Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Light on the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Warning light – error code

Follow these steps to reset the airbag light and all engine warning lights on the BMW 5 Series. First, get in the vehicle and connect your diagnostic software to the OBD port or via Bluetooth; then turn on the ignition, allowing the software to communicate with the control unit, as shown in the video. At this point, scan for errors, then reset the airbag light and the engine warning light, following the video tutorial to the end!

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag from a BMW 5 Series?
How to Remove the Steering Wheel Airbag from a BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) To remove the steering wheel airbag from a BMW 5 Series, loosen the single screw that secures the airbag to the center of the steering wheel. This sc…
How to Reset the Airbag Fault on the BMW 5 Series E60
How to Reset the Airbag Fault on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To clear the airbag error on the BMW 5 Series E60, close all four doors and turn on the ignition to check the warning light, then turn it off. Insert…
How to Reset the Engine Light on a BMW 5 Series
How to Reset the Engine Light on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this guide, you will find instructions to reset the engine fault light on the BMW 5 Series, as well as on all other models from the manufacturer. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos