Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Fluid Warning Light on a BMW

Model: BMW BMW Various
Part: Warning light – error code

In this video, learn how to reset the brake fluid replacement warning light on a BMW. It is advisable to perform this procedure only if the light remains on after replacing the brake fluid. To reset, turn on the instrument cluster without starting the engine, then press the ignition button without pressing the brake or clutch pedal, depending on the type of gearbox. After turning on the instrument cluster, press and hold the reset button located on the left side of the cluster until a yellow triangle warning light appears, then press it until the brake fluid light comes on, and hold it to perform the reset, indicated by the OK light turning on and then off.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set automatic time change on BMW
How to set automatic time change on BMW
BMW BMW Various The following video tutorial will explain how to set the automatic time change on a BMW car. The steps to follow are really simple and quick. To set …
How to Set the Time on a BMW Vehicle
How to Set the Time on a BMW Vehicle
BMW BMW Various Setting the time on a new generation BMW is simple and quick as it is done through the infotainment system, taking only a few minutes. To set the tim…
How to Reset the Oil Light on the BMW M8 2022
How to Reset the Oil Light on the BMW M8 2022
BMW BMW Various If you want to learn how to reset the oil light on your 2022 BMW M8, simply follow these steps. First, enter the cabin and ensure that it is complete…

Other guides you may be interested in

    Frequently Asked Questions

    • Bmw Vari - What does the DDE light mean in BMW cars? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos