Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
MK 2, F21, F20
- Years 2011-2019 In today's tutorial, you will see how to reset the service light on a BMW 1 Series f20. First, you need to turn on the vehicle's ignition without starting the engine. Then, you will need to press and hold the button on the left side of the speedometer to enter the reset menu as shown in the video. Once you have done that, press and hold the previous button on the oil maintenance option until the reset request appears, then release the button and press it again, holding it until the reset is complete to finish the job.
Posted on 14 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |