Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to measure the oil level on BMW 3 Series F30/F31 version

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: -board computer
Operation: How to measure the oil level on BMW 3 Series F30/F31 version

In this video we see how to measure the oil level on those BMW 3 series version F30/F31 that do not have the dipstick, but that carry out the measurement through the Idrive system: So we will have to use the button/wheel located right in the middle of the console, and we will scroll the menu to: "vehicle information". Then we select "vehicle status" and go to "oil level". We scroll down to "Engine oil level measurement". A warning tells us that this operation is possible only when the engine is at operating temperature, and the vehicle is parked on a level surface. The gear must be selected in "P" or "N", and the accelerator must not be pressed. We start the engine, and the check begins. Then it gives us a minimum and a maximum and confirms that the oil level is fine.


Posted on 18 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 1998-2006 - What to do if the on-board computer on your BMW 3-series E46 no longer works? Read Answer
    • Serie 3 2019-2026 - How to reset the brake light on BMW 3 series? Read Answer
    • Serie 3 2005-2013 - Why does the BMW 3 Series navigator stop working? Read Answer
    • Serie 3 2012-2019 - What does the message "water in the tank" mean in my BMW 3 Series? Read Answer
    • Serie 3 2012-2019 - What to do if the brake pad reset does not work in a BMW? Read Answer
    • Serie 3 2012-2019 - What warning lights are there in the dashboard of the BMW 3 Series? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos