Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2018 Cadillac XT5

Model: Cadillac Xt5 MK 1 - Years 2017-2024
Part: Checks and maintenance

In today's article, we are going to show you how to reset the oil light on the Cadillac XT5. This operation will take less than 1 minute and no tools are needed. To reset the light, you need to turn on the ignition without starting the engine, then press the SEL button on the right side of the steering wheel to access the menu. Use the down arrow button to navigate to the OPTIONS section, once there, press the left button and then use the up or down button to find the OIL LIFE option. Once you find the light, press the SEL button and hold it until the light is reset and shows 100%. You can then release the button and restart the ignition to verify that the procedure was successful.

Posted on 25 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Cadillac XT5
How to Reset the Oil Light on a Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) If the oil light on your Cadillac XT5 stays on after an oil change, don't worry; it's a minor issue that can be easily resolved with a manual reset. …
How to Reset the Oil Service Light on a Cadillac XT5?
How to Reset the Oil Service Light on a Cadillac XT5?
Cadillac Xt5 (2017-2024 / MK 1) In this tutorial, you will see how to reset the oil service light on a Cadillac XT5, a very simple operation. Before proceeding, ensure you have comp…
How to Reset the Oil Service Light on a Cadillac XT5?
How to Reset the Oil Service Light on a Cadillac XT5?
Cadillac Xt5 (2017-2024 / MK 1) In this tutorial, you will see how to reset the oil service light on a Cadillac XT5. Before performing this simple and quick operation, ensure you ha…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos