Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cts
    4. : How to replace the front wheel hub of a Cadillac CTS.

Cadillac Cts - Video tutorial

Model: Cadillac Cts MK 2 - Years 2008-2014
Part: Bearing
Operation: How to replace the front wheel hub of a Cadillac CTS.

Today in this guide, we will go over the main steps on how to disassemble and replace the hub or wheel bearing of the front wheel of a Cadillac CTS. First, we lift the vehicle and remove the front wheel. Then, we unscrew the fastening screws of the brake caliper, removing it from the disc, as shown in the video. At this point, we use a 10mm key to unscrew the brake disc nuts, accessing the bearing. We unscrew the 13mm rear nut, removing and replacing the wheel hub with the new one, following the video tutorial until the end!


Posted on 31 March 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos