Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Traverse
    4. : 2018-2024 (MK 2)

Chevrolet Traverse Years 2018-2024 (MK 2)

Chevrolet Traverse (2018-2024 / MK 2)
Resetting the Service light on the Chevrolet Traverse.
After performing the engine oil replacement on the Chevrolet Traverse, we need to reset the control system that notifies us with a message on the instrument …read all…
Posted on 6 February 2024 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to replace the battery in your Chevrolet Traverse key
To be able to replace the battery in the key of your new Chevrolet Traverse, you simply need a small flat screwdriver. Let's find out what are the various …read all…
Posted on 7 May 2023 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to paint the Chevrolet Traverse emblem
In this video we will show you how to paint the Chevrolet Traverse emblem. To prevent other parts of the rear trunk and the surfaces around the emblem from …read all…
Posted on 25 April 2023 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to change the emblem of the Chevrolet Traverse
Let's see how to change the original Chevrolet Traverse emblem, in yellow gold, with a more aggressive one in black, both on the front and on the back of the …read all…
Posted on 14 December 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to reset the 2020 Chevrolet Traverse maintenance warning light
If the maintenance warning light comes on on the instrument panel of your Chevrolet Traverse Mk2 (year 2020) even though the vehicle has already been serviced, …read all…
Posted on 7 September 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to replace the battery in the Chevrolet Traverse remote control?
Replacing the battery of the Chevrolet Traverse remote control is a very simple and cheap operation, let's see how to proceed in this tutorial. To do this, we …read all…
Posted on 5 December 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to reset the oil warning light on the Chevrolet Traverse
The procedure required to manually reset the engine oil warning light of your Chevrolet Traverse Mk2 is very simple and thanks to the following guide you will …read all…
Posted on 19 August 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to remove or replace Chevrolet Travers car emblems
As shown in the video, removing and replacing the Chevrolet Traverse car emblems is very simple. You have to use an adhesive tape to limit the writing you want …read all…
Posted on 17 July 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to replace the cabin air filter in the Chevrolet Traverse
The procedure for replacing the cabin air filter is very similar in many vehicles. Below we will find out how to do this in your Chevrolet Traverse Mk2. First …read all…
Posted on 22 June 2022 by ScegliAuto
Chevrolet Traverse (2018-2024 / MK 2)
How to replace the air filter in the Chevrolet Traverse
In today's video you will see a very simple and perfectly executable maintenance operation in your garage. You will see how to replace the air filter in the …read all…
Posted on 19 May 2024 by ScegliAuto
Shock absorbers (2) Battery (4) Key (3) -board computer (1) Checks and maintenance (2) Tail light (1) Air filter (3) Cabin air filter (2) Injectors (1) Headlight bulb (2) License plate light (1) Handle (1) Mask (1) Starter motor (1) Engine oil (1) Door panel (1) Front bumper (1) Window lift button (1) Instrument cluster (4) Lambda sensor (1) Windscreen wipers (2)

See also:

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos