Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Oil filter

See other generations:
Video tutorial

Discover in this brief and simple guide how to replace the engine oil and oil filter of the Chevrolet Cruze as part of regular maintenance. First, lift the vehicle and unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, unscrew the oil filter cartridge found at the bottom of the engine bay to remove it and replace it with a new one, as shown in the video.

Now, unscrew the filler cap and pour in the new engine oil!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light of the Chevrolet Cruze
How to Reset the Oil Light of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To correctly reset the engine oil light of your Chevrolet Cruze (2009-2015), simply follow a very straightforward procedure, almost identical to thos…
How to Reset the Oil Light on a 2013 Chevrolet Cruze
How to Reset the Oil Light on a 2013 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If the oil light on the instrument panel of your 2013 Chevrolet Cruze illuminates even after changing the oil and the related filter, you need to pro…
How to Reset the Service Light on a Chevrolet Cruze
How to Reset the Service Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today, we will discover the procedure to reset the service light for the regular maintenance oil change on a Chevrolet Cruze. First, get into the car…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos