Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from the Steering Wheel of a Chevrolet Silverado?

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Airbag

See other generations:
Video tutorial

To remove the airbag from the steering wheel of a Chevrolet Silverado, first disconnect the battery to prevent the airbag from deploying accidentally. Once the battery is disconnected, loosen the two bolts located on the sides of the steering wheel.

After these two bolts are removed, you can pull the airbag out of its housing and disconnect the connectors located at the top. Once the part is removed, you can install a new one, which must be properly connected and secured with the bolts.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from the Chevrolet Silverado
How to Remove the Airbag from the Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Below, you will find the procedure to disassemble and replace the steering wheel airbag of the Chevrolet Silverado in simple and quick steps. First, …
How to Reset the Onboard Computer in a Chevrolet Silverado Pickup?
How to Reset the Onboard Computer in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2019-2026 / MK 1) In this tutorial, you will see how to reset the onboard computer in a Chevrolet Silverado pickup, a very simple and quick operation that can be done …
Where to Find the Fuses of the Chevrolet Silverado 2
Where to Find the Fuses of the Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene safely and effectively in case of f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos