Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Life Light on a Chrysler Pacifica Mk1

Model: Chrysler Pacifica MK 1 - Years 2017-2024
Part: Service warning light

This guide shows how to reset the oil change light on a Chrysler Pacifica Mk1. To perform this procedure, you must have changed the engine oil. First, press the ignition button twice without pressing the pedals. Next, use the controls on the left side of the steering wheel; navigate through the various information tabs until you reach the tab related to engine oil life. Hold the "OK" button until the light resets completely. At the end of the operation, the percentage of engine oil life will be displayed at maximum.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Light on a Chrysler Pacifica?
How to Reset the Engine Oil Light on a Chrysler Pacifica?
Chrysler Pacifica (2017-2024 / MK 1) This video tutorial shows you how to reset the engine oil maintenance light in a few simple steps. First, get in the vehicle and turn on the instrume…
How to Reset the Oil Light on the 2018 Chrysler Pacifica
How to Reset the Oil Light on the 2018 Chrysler Pacifica
Chrysler Pacifica (2017-2024 / MK 1) Manually resetting the engine oil light on your 2018 Chrysler Pacifica takes just a few seconds to perform manually. Below, we will discover the vari…
How to reset the automatic transmission in the Chrysler Pacifica?
How to reset the automatic transmission in the Chrysler Pacifica?
Chrysler Pacifica (2017-2024 / MK 1) In this tutorial, you can see how to reset the automatic transmission in the Chrysler Pacifica, an extremely simple and quick operation to perform as…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos