Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

Video tutorial

How to do it? The cost for the replacement is minimal, and the operations to replace it are simple. The filter is located in the engine bay under the windscreen.

To access it, remove the three clips securing the cover, which can be done by hand. Once the filter cover is removed, take out the cartridge from its housing by pulling it out carefully to avoid dust dispersal.

Obtain a pollen filter of the same model identical to the original. Clean the housing from any dirt.

Refit the new cartridge into the container, ensuring it is positioned correctly, and close the cover with the clips.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Filter on a Citroën Xsara Picasso
How to Remove the Cabin Air Filter on a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to replace the cabin pollen filter on the Xsara Picasso? This video shows how to perform the disassembly: lift the bonnet, use a lever to remove …
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Citroen Xsara Picasso (1999-2012 / MK 1) The pollen filter is located in the engine compartment under the windscreen. This filter purifies the cabin air, preventing allergies for sensitive i…
How to Replace the Pollen Filter on Citroen Xsara Picasso
How to Replace the Pollen Filter on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, you can see how to replace the pollen filter on the Citroen Xsara Picasso by following a few simple steps: first, purchase a …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos