Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Citroen Saxo

Model: Citroen Saxo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

Video tutorial

How to remove the door panel on a Citroen Saxo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the front engine compartment.

Using a screwdriver or power drill, unscrew the screws on the handle on the panel and then around the perimeter. Use a lever or screwdriver to pry off the grille covering the speaker, removing it from the door.

Always detach all clips with the lever by prying around the entire perimeter of the door. Finally, pull off the panel with your hands, disconnecting the opening lever cable, the window lift connectors, and the speaker connectors if attached to the door.

Reassemble everything in reverse order.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Side Window of the Citroen Saxo
How to Remove the Side Window of the Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) This guide briefly outlines the steps to remove and replace the window regulator motor and side window of the Citroen Saxo. First, open the front doo…
How to replace the front headlight bulb of the Citroen Saxo
How to replace the front headlight bulb of the Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) If you own a Citroen Saxo and want to replace one of the headlight bulbs yourself, all you have to do is read the following guide and follow all the …
Where to Find the Fuses on Citroën Saxo?
Where to Find the Fuses on Citroën Saxo?
Citroen Saxo (1996-2004 / MK 1) Each fuse on the Citroën Saxo will be located inside one of the designated fuse boxes installed in the vehicle: in this type of vehicle, there are tw…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos