|
Do it yourself
| |||
| ||||
Service: How to Change Engine Oil, Filter, and Air Filter
Model: Citroen C4
MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Open the bonnet and remove the plastic engine cover. Then, using a socket spanner, unscrew the wiper arm on the driver's side. Carefully remove the plastic clips as shown in the video, move the levers that secure the plastic in front of the windscreen, and remove it. Next, unscrew the bolt that secures the brake fluid reservoir, unscrew the bolt holding the plastic fairing shown in the video, and carefully unclip all the clips. Proceed to remove the intake hose, then unclip the connector for the mass air sensor. The guide shows the parts disassembled so far. Unscrew the screws holding the air filter box cover, remove the cover, and replace the old filter, ensuring the rubber gasket side faces upwards, then reassemble everything. To replace the oil, unscrew the screws shown in the video and remove the lower protective plastic undertray. Unscrew the oil filter as shown in the video, place a container with at least a 5-litre capacity under the oil sump, and carefully unscrew the oil drain plug, allowing it to drain completely. Now, place the new filter in the container, carefully applying the new O-ring, screw it back into place, tighten the plug under the oil sump, and pour in the new engine oil, with an approximate quantity between 3.75 and 3.85 litres. This guide was filmed on the 1.6 HDi turbo diesel engine.
Updated on 2 February 2026 by ScegliAuto
Related tutorials
Citroen C4
(2004-2010 /
MK 1)
When we need to perform an oil change, it is necessary to also replace the oil filter. The oil filter in the Citroen C4 car is located inside the fro…
Citroen C4
(2004-2010 /
MK 1)
In this video, we will see how to change the air filter on a Citroen C4 MK1 diesel: the air box is a black plastic container in a corner of the engin…
Citroen C4
(2010-2018 /
MK 2)
Start the oil and filter change, which is the basic service, on a Citroen C4 MK2 by ensuring the car is off and parked safely. Unscrew the oil filler…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |