Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Citroen Jumper MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for the vehicle model in question is located in the engine compartment, just below the windscreen, right behind the coolant reservoir. To replace it, it is necessary to remove the wiper blades and take off the plastic grille covering the area beneath the windscreen.

At this point, you can unclip the elastic that holds the filter and extract it from its housing. Check that there are no dirt residues inside and insert the new one (activated carbon filters are recommended), orienting it according to the direction of the airflow.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Citroen Jumper
How to Replace the Cabin Air Filter on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you want to independently replace the cabin air filter in your Citroen Jumper but don't know how to perform the operation, follow the steps descri…
Replacing Air Filter on Citroen Jumper
Replacing Air Filter on Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) How to remove the air filter from a Citroen Jumper? Let’s look at removing the filter located in the engine bay. Lift the front bonnet of the Jumper,…
How to change the cabin filter of the Citroen Jumper
How to change the cabin filter of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) In this video, we see how to change the cabin air filter of the Citroen Jumper: the component is located inside the engine compartment of the vehicle…

Other guides you may be interested in

    Frequently Asked Questions

    • Jumper 2014-2024 - Where is the cabin air filter on Citroen Jumper? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos