|
Do it yourself
| |||
| ||||
How to change the cabin filter of the Citroen Jumper
Model: Citroen Jumper
MK 3
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
In this video, we see how to change the cabin air filter of the Citroen Jumper: the component is located inside the engine compartment of the vehicle, on the right side when looking at it from the front, right at the end of the windshield. It will be necessary to remove the ventilation grille of the engine compartment, which is screwed to the frame with three screws on each side. Just below the grille, we can find the compartment that contains the cabin air filter, which is contained inside a sort of removable tray. This operation should be done once a year, or every 15,000 km approximately. Before putting the new filter back in place, we recommend removing dust and residues from the tray, and then putting the new filter in place, making sure that the arrows are always pointing downwards.
Posted on 10 October 2025 by ScegliAuto
Related tutorials
Citroen Jumper
(2006-2014 /
MK 2)
In this video, you can see where the cabin filter is located in the Citroen Jumper van and how to remove it, allowing you to clean or replace it dire…
Citroen Jumper
(1994-2006 /
MK 1)
Before you can start, open the front bonnet of your Citroen Jumper. Begin by removing the exhaust manifold by unscrewing and removing the related fix…
Citroen Jumper
(2006-2014 /
MK 2)
If you are curious about where to find the OBD2 port on your Citroen Jumper, simply read the following steps carefully and apply them. First, open th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |