Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the BSI from a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Fuse box

In this video, learn how to remove the BSI from a 2006 Citroen C4: it is located at the bottom of the dashboard, between the steering wheel and the driver's door. Start by unscrewing the visible screws around the trim, disconnect the electrical connectors, and remove the screws inside the compartment that allow you to take off the trim. Carefully pull out all the electrical connectors, taking care not to damage the wires. Now, from underneath, you can start to slide out the BSI, which will come out completely after disconnecting the last connectors. Secure the connectors to prevent damage while waiting to reinstall it.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BSI unit of the Citroën C4?
How do you reset the BSI unit of the Citroën C4?
Citroen C4 (2010-2018 / MK 2) To reset the BSI unit of the Citroën C5, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the dashb…
How do you reset the BSI unit of the Citroën C4?
How do you reset the BSI unit of the Citroën C4?
Citroen C4 (2004-2010 / MK 1) The procedure for resetting the BSI control unit on the Citroën C4 involves connecting a diagnostic tool to the OBD port of the vehicle: this is loca…
How do you reset the BSI unit of the Citroën C5?
How do you reset the BSI unit of the Citroën C5?
Citroen C4 (2004-2010 / MK 1) To be able to reset the BSI unit on the Citroën C4, it is necessary to connect a diagnostic tool to the corresponding OBD port of the vehicle: this p…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 2020-2027 - Where is the fuel pump fuse located on the Citroen C4? Read answer
    • C4 2010-2018 - Where is the air conditioning fuse of the Citroà «n C4 located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos