|
Do it yourself
| |||
| ||||
What to do if the key gets stuck in the ignition
Model: Citroen Xsara
MK 1
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
In this video, see how to resolve an emergency that may have affected your older car, such as the Citroen Xsara Picasso shown in the footage. In this case, the key is stuck in the "On" position, and it cannot be removed from its housing, nor can the engine be turned off. A very unpleasant situation. The YouTuber managed to find the connector that allows the ignition to be turned off by dismantling the lower part of the dashboard, preventing the battery from draining. Since it was a Saturday and he had promised his children a trip to the seaside, he also found a (very temporary) way to start the car; with the ignition still on, by bridging the blue wire and the red wire, the vehicle can be started. Naturally, the first thing to do on Monday is to rush to the auto electrician!
Updated on 30 September 2026 by ScegliAuto
Related tutorials
Citroen Xsara
(1997-2006 /
MK 1)
This guide will show you how to program the key for the Citroen Xsara, following the instructions below. To program the key, you will need specific k…
Citroen Xsara
(1997-2006 /
MK 1)
Before proceeding with the removal of the airbag, disconnect the battery to avoid triggering any warning lights. The airbag is secured to the steerin…
Citroen Xsara
(1997-2006 /
MK 1)
How do you replace the key battery on a Citroen Xsara? Here’s how to carry out the replacement effectively: Take your ignition key and use a screwdri…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.120
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |