Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the windscreen wiper pump on the Dacia Duster

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

In this video, we will see how to replace the windscreen wiper pump on the Dacia Duster. The pump is located on the side of the water reservoir.

First, remove the left wiper arm using a 17mm socket, then take off the gasket by pulling upwards to remove the plastic clip, which you will extract with a screwdriver. Next, remove the gasket and the screw located in the middle of the plastic grille, which you will lift.

Now you have found the water reservoir: unscrew the screw that holds it and disconnect the electrical connector by lifting the safety latch, and remove the two water hoses. Now you can take out the reservoir and remove the water pump.

Place the new one in position, ensuring the correct orientation. Reassemble everything by following the reverse order.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Dacia Duster (2010-2017 / MK 1, HS) In this video, we will see how to replace the front and rear wiper blades on the first series Dacia Duster. The sizes of the blades are 50 cm for the…
Dacia Duster (2010-2017 / MK 1, HS) Before you can start, exit the cabin of your Dacia Duster and head to the front of the vehicle. Begin by lifting the entire wiper arm, along with the…
Dacia Duster (2010-2017 / MK 1, HS) In the Dacia Duster, all the fuses are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find two …

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - Where is the washer fluid reservoir located in Dacia Duster? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos