Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. EVO
    3. : Evo 6

How to replace the oil filter and engine oil of the Evo 6.

Model: EVO Evo 6 MK 1 - Years: 2020, 2021
Part: Oil filter

Video tutorial

Replacing the oil filter and engine oil on Evo 6 vehicles produced since 2020 is a simple and quick operation that can be done independently. To make the engine oil replacement easier, it is necessary to open the front hood and unscrew the oil reservoir cap. We raise the vehicle on jack stands and remove the oil pan plug to allow the used oil to drain into a container.

While the reservoir is draining, we remove the bolts that secure the oil filter housing in order to replace it. After replacing the filter, we close the oil pan plug and lower the vehicle back to the ground. Using a funnel, we pour 5 liters of engine oil into the reservoir.


Posted on 2 December 2025 by ScegliAuto


Related tutorials

How to reset the service light on the EVO 6
How to reset the service light on the EVO 6
EVO Evo 6 Today we will explain how to reset the service light on the EVO 6. The first step to be performed is to turn on the instrument panel. The second step…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos