Do it yourself
Frequently asked questions about cars and motorcycles

How to Unscrew the Radiator Cap on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Perform maintenance yourself to save on labour costs. In this video, learn how to unscrew the coolant refill cap on a Fiat 500. Pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and secure it. Next, locate the coolant refill cap and unscrew it by hand.

Ensure this operation is done with the engine and liquid cold for safety reasons. Tighten the cap with the appropriate thread and close the engine cover after maintenance.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2021 / 312) How to replace the coolant in a Fiat 500? Learn the procedure for replacing the radiator fluid. Lift the front bonnet of the engine, unscrew the cap …
Fiat 500 (2014-2022 / 500 X) Watch this video to learn how to unscrew the cap for topping up the radiator fluid on a Fiat 500. Perform maintenance yourself to save on labour cost…
Fiat 500 (2007-2021 / 312) Before you can start, position a container under the radiator of your Fiat 500. Begin by unscrewing and removing the lower drain plug, then wait for …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos