Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windshield washer pump replacement for Iveco Ducato 230.

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Checks and maintenance

To replace the windscreen washer pump of the Iveco Ducato, we need to remove the front bumper. We open the front hood, unscrew the four screws that hold the logo grille and remove it, unscrew the two upper side screws of the bumper and the two lower bolts. With the help of a screwdriver, we release the clips on the sides of the front fenders and the bottom clip, now we also unscrew the central nut of the grille and remove the bumper. On the driver's side, we find the reservoir and at the bottom the pump. We disconnect the electrical connector, remove the pump and disconnect the lower rubber and the outlet tube, reinsert the rubber into the reservoir body and insert the new pump, insert the outlet tube and the connector. We reassemble the bumper by reversing the operations.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter in a Fiat Ducato 230
How to Replace the Pollen Filter in a Fiat Ducato 230
Fiat Ducato (1993-2016 / MK 2) In this video tutorial, you can see how to replace the pollen filter in a Fiat Ducato 230 by following a few simple steps: the pollen filter is locat…
How do you disassemble the windshield wiper pump in the Fiat Ducato?
How do you disassemble the windshield wiper pump in the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) The pump that is responsible for sending water onto the windshield, so that it can then be washed with the windshield wiper brushes, in the Fiat Duca…
How to tell if the windshield washer pump is not working
How to tell if the windshield washer pump is not working
Fiat Ducato (1993-2016 / MK 2) In this video we will see how to verify that the windshield washer pump is working. In this case, the test is being conducted on a Fiat Ducato X244, …

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos