Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you make a double on a vintage Fiat 500?

Model: Fiat 500 Epoca - Years 1957-1975
Part: Transmission

On Fiat 500 cars made before 1975, the gearbox was not synchronized, so to change gears we had to perform what is called a "double-clutching" but in common language it was called a "double-shift". For example: press the clutch, put it in first gear, give gas, press the clutch again, release the accelerator, put it in neutral, release the clutch, press the clutch again and then put it in second gear. If we had to downshift, that is, go back, there was a variation: if we had to go from third to second gear: press the clutch, put it in neutral, give a little gas, and in the meantime press the clutch and put it in second gear. This was done to help the gears be more synchronized.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Fuel Pump on a Fiat 500
How to Remove and Replace the Fuel Pump on a Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video, see how to remove and replace the fuel pump on a Fiat 500 (old model). Use a socket spanner to separate the fuel pump from its housing…
How to Replace the Oil Filter on a Fiat 500?
How to Replace the Oil Filter on a Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the oil filter on a Fiat 500, access the lower part of the engine bay, near the engine oil reservoir. The filter will be located at the re…
How to Remove the Horn from a Fiat 500
How to Remove the Horn from a Fiat 500
Fiat 500 (1957-1975 / Epoca) To remove the horn from a Fiat 500, open the bonnet to access the engine bay. Specifically, at the front and inside the bodywork, you will find the h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos