Do it yourself
Frequently asked questions about cars and motorcycles

How to perform the maintenance and reset the service light of the Fiat 500 Hybrid

Model: Fiat 500 312 - Years 2007-2024
Part: Engine oil

Today we will explain how to perform a full service on a Fiat 500 Hybrid vehicle. We start the service by replacing the air filter, opening the front hood and unscrewing the two screws on the cover. We remove the filter, clean the housing, and insert the new filter. We close the cover and screw in the screws. We lift the front part of the car to replace the oil filter. We unscrew the nut on top of the filter cover and replace it. We remove the nut on the oil pan to drain the used oil into a container. We close the nut on the oil pan and lower the vehicle. We get on the car and remove the lower part of the passenger side glove compartment to access the cabin air filter. We remove and insert the new filter, close the glove compartment cover, and complete the service by resetting the service light. To reset the light, we need to remove the lower cover of the left dashboard to access the OBD port. We connect the diagnostic computer to the port and select the reset settings to start the procedure of updating the kilometers to the next car service. Once the reset is done, we restart the instrument panel.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) The service light reset, related to the car service, on a Fiat 500 L car, follows a very simple and quick procedure to be carried out independently. …
Fiat 500 (2007-2024 / 312) To proceed with resetting the tire pressure warning light on the Fiat 500 hybrid, we need to turn on the instrument panel and press the menu button l…
Fiat 500 (2007-2024 / 312) Resetting the service light on the Fiat 500 Hybrid requires a diagnostic tool. The EOBD socket is located under the dashboard, to the left of the ste…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos