Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain the Indicator Stalk on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Checks and maintenance

Are you having problems with the indicator stalk on your Fiat 600? Learn how to maintain it. First, disconnect the battery cables located in the engine compartment, then unscrew the screws on the sides of the steering wheel. Remove the covering plastics from the steering wheel and disconnect the relevant power connectors. Use a suitable cleaner and lubricant (with a straw to reach every point) on the connectors that link to the indicator stalk, being careful not to damage it. Prepare to refit all the power connectors and other components. Test the correct operation of the indicator stalk.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Service the Engine of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Let’s see how to adjust the carburettor on a Fiat 600. Open and lift the front bonnet (secure it); unscrew the two nuts (located above the cover) of …
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

Other guides you may be interested in

    Frequently Asked Questions

    • Seicento 1998-2010 - How to solve an electric driving problem on the Fiat 600? Read answer
    • Seicento 1998-2010 - What are the problems with the City mode of the Fiat Seicento? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos