How to Service the Engine of a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

This video is currently unavailable

Let’s see how to adjust the carburettor on a Fiat 600. Open and lift the front bonnet (secure it); unscrew the two nuts (located above the cover) of the throttle body cap. Disconnect the power connector and unscrew with a suitable spanner (Allen key) the screw located (as shown in the video) above the throttle body.

Unscrew or screw in based on the fuel leakage.

After performing maintenance: reconnect the power connector and close the throttle body cap (tighten the securing screws) and close the front bonnet. Test the correct operation of the engine.

Updated on 7 March 2026 by ScegliAuto

Other guides you may be interested in

Key - Maintenance and repair on other vehicles

Throttle Body - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

How to Service the Engine of a Fiat 600

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos