Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

These brief and simple instructions will guide you through the steps to reset the service light for the routine maintenance of the engine oil change on a Fiat 500X. First, get into the vehicle and turn on the instrument cluster; then press the accelerator pedal three times, subsequently turning off the instrument cluster, as shown in the video. At this point, wait about ten seconds before turning the instrument cluster and the engine back on, then check the actual reset of the service from the instrument cluster display!

Posted on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat 500X?
How do you reset the Service light on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to reset the Service light of the Fiat 500X, you need to turn on the instrument panel by inserting the ignition key into the ignition switch…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
How do you reset the Service light on the Fiat 500X?
How do you reset the Service light on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) To reset the Service light of the Fiat 500X, you need to insert the ignition key into the ignition switch, so that you can turn it to turn on the ins…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos