Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter in a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Engine oil

To replace the engine oil and filter in a Fiat Panda, park the vehicle on a flat surface and safely lift it to access the underside of the engine. Position a container under the oil sump, unscrew the filler cap in the engine bay, and then the drain plug located under the sump. Allow the used oil to drain completely, then refit the drain plug ensuring the seal is in good condition. Locate the oil filter, unscrew it with the appropriate tool, and remove it from its location. Lubricate the seal of the new filter with a small amount of clean oil and screw it on until correctly tightened. Pour the new engine oil through the filler neck, check the level with the dipstick, and add more if necessary. Start the engine for a few seconds, turn it off, and check for leaks around the filter and drain plug.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oi…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…
Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos