Do it yourself
Frequently asked questions about cars and motorcycles

"Service" or "Change Engine Oil" on Fiat 500 2013

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Onboard computer

See other generations:
Video tutorial

When your 2013 Fiat 500 displays the message "Change Engine Oil" or "Service" in some other version, it indicates that the periodic maintenance, namely the oil change or full service, is nearly due. In the onboard computer menu, you can find the remaining miles since the last oil change or the remaining days.

If the engine oil is replaced, the message does not clear itself; you must reset it either through a manual procedure in some earlier versions or with diagnostic equipment. (This procedure is performed by a qualified technician, that is, an authorised mechatronic workshop).

The manual procedure is divided into the following steps: 1- Turn on the ignition (position 2 of the ignition switch). 2- Press the accelerator three times, holding it down on the third press for a few seconds. 3- Turn off the ignition. 4- Turn on the ignition and check if the reset has occurred.

If the message does not reset, you need to use diagnostic equipment.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2022 / 312) To reset the service light on a Fiat 500c, start by turning on the instrument panel. You will see the message "change engine oil" with the oil warnin…
Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …
Fiat 500 (2007-2021 / 312) This guide outlines the necessary instructions for changing the engine oil and oil filter while performing routine maintenance on the Fiat 500 1.4. F…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos