Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exhaust Manifolds from a Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Exhaust muffler

Before you begin, open the rear engine bonnet of your Fiat 500. This operation should be performed when the engine is cold. Start by loosening the four bolts that secure the manifold to the exhaust and the cylinder head. Once you have removed all the bolts, the manifold will be free. At this point, to remove it, simply pull it off. To remove the second manifold, just repeat these few steps. Once you have completed this step, you will have finished removing the manifolds from the Fiat 500.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Adjustment of the tappets on vintage Fiat 500 cars
Adjustment of the tappets on vintage Fiat 500 cars
Fiat 500 (1957-1975 / Epoca) In this video we can see how to adjust the tappets of a vintage Fiat 500. The desired adjustment is 0.15 for the intake valves, which is the second o…
How Many Lambda Sensors Does the Fiat 500 Have and Where Are They Located?
How Many Lambda Sensors Does the Fiat 500 Have and Where Are They Located?
Fiat 500 (2007-2022 / ) In the Fiat 500, as in most recently manufactured vehicles, there are two lambda sensors in the exhaust system. As shown in this video, the first sen…
Where are the Lambda Sensors Located in the Fiat 500?
Where are the Lambda Sensors Located in the Fiat 500?
Fiat 500 (2007-2022 / 312) In this video, you can see where the two lambda sensors are positioned in the Fiat 500, which are crucial for the proper functioning of the engine an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos