Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Pump

Before you can start, lift the front left side of your Fiat Punto. Begin by unscrewing and removing the bolts that secure the wheel, then remove the wheel itself. Once done, remove the car battery by disconnecting the terminal clamps and then removing the retaining bracket, followed by the battery base. At this point, bleed the clutch system. Next, disconnect the clutch pedal from the corresponding pump, then unscrew the bolts that secure the pump to its support brackets. After completing this step, you can remove the pump, finishing the disassembly. To fit the new pump and reassemble everything, follow these instructions in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
How to Bleed the Clutch Pump in the Fiat Punto?
How to Bleed the Clutch Pump in the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To bleed the clutch pump in the Fiat Punto, open the bonnet and unscrew the cap of the reservoir containing the clutch fluid. This will allow you to …
What to do if you hear a squeak from the clutch pedal on a Fiat Punto
What to do if you hear a squeak from the clutch pedal on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) A squeak from the clutch pedal on a second-generation Fiat Punto is a common issue. The most frequent cause is the clutch hydraulic pump (slave cylin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos