Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change and Replacement of Various Filters on Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Checks and maintenance

Lift the bonnet, secure it and unscrew the top cap of the oil compartment. Next, raise the vehicle and unscrew the bolts that secure the lower engine cover. Position a container beneath the oil compartment and unscrew the drain bolt. While collecting the oil in the container, unscrew the old oil filter as shown in the video. Measure the amount of spilled engine oil and pour the same amount from the top compartment, after obviously tightening the drain hole. The tutorial also shows the replacement of the other filters. Cheers!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Replace the Filters in the Fiat Panda
How to Replace the Filters in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, see how to replace the filters in the Fiat Panda. First, lift the car using a lift or hydraulic jack. Place a container under…
How to Reset the Maintenance Light on the Fiat Panda
How to Reset the Maintenance Light on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to reset the maintenance light on the Fiat Panda by following simple steps: first, perform maintenance on you…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos