Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

Before you start, lift the car and remove the front left wheel. Begin by opening the bonnet, disconnecting the battery, and removing it. After removing the battery, you will also need to take out its base.

Once done, you will have access to the clutch pump. Next, unscrew and remove the two bolts that secure it to the pedal.

Before you can fully extract it, disconnect it from the pedal by releasing the two clips; then you will need to bleed the system. At this point, you will be able to remove the pump from the pedal.

After extracting the pump from its housing, slide off the clamp and remove the hose. This will have removed the clutch pump.

To install the new pump, simply follow the instructions in reverse, and you will have successfully completed the replacement.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
How to Bleed the Clutch Pump in the Fiat Punto?
How to Bleed the Clutch Pump in the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To bleed the clutch pump in the Fiat Punto, open the bonnet and unscrew the cap of the reservoir containing the clutch fluid. This will allow you to …
How to Replace the Clutch Pump on a Fiat Punto
How to Replace the Clutch Pump on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the clutch pump on a Fiat Punto, open the bonnet to access the components inside the engine bay. On the right side, you will find the batt…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos