Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Clutch

To replace the clutch on a Fiat 500, access the underside of the engine bay to unscrew the bolts securing the clutch cover, which is directly connected to the gearbox. You will also need to lift the car by unscrewing the bolts that secure the front right wheel and completely removing it. After removal, detach the inner wheel arch cover to access the internal components. By disconnecting the final connectors, you can open the clutch cover by unscrewing the bolts that secure it in place. You can then fit the new clutch and reassemble all previously removed components.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…
How to Replace the Clutch Pedal on the Fiat 500
How to Replace the Clutch Pedal on the Fiat 500
Fiat 500 (2007-2024 / 312) In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and re…
How to Replace the Clutch on the Fiat 500?
How to Replace the Clutch on the Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch on the Fiat 500, open the bonnet to access the engine bay and remove the various obstructing parts shown in the video. Next, li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos