Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Gearbox of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Transmission

Today's main instructions will show you how to remove and replace the gearbox and clutch of the Fiat 500. First, raise the vehicle and begin by removing the front left wheel; then remove the wheel arch liner and drain the engine oil, as shown in the video. At this point, undo the bolts of the gearbox, disconnecting the gear lever adjustment; remove the gearbox and replace the vehicle's clutch kit if necessary, installing the original components, following the video tutorial until the end for reassembly!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gearbox on a Fiat 500
How to Remove the Gearbox on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's tutorial video, we will see how to remove and replace the gearbox and clutch on a Fiat 500 1.2, following the instructions below. First, l…
Oil Change for Fiat 500 Gearbox
Oil Change for Fiat 500 Gearbox
Fiat 500 (2007-2021 / 312) Lift the car and remove the 12 mm bolt that acts as the plug for the manual gearbox drain hole. Then, unscrew the T6 Torx screw indicated in the vide…
Disassembly of the gearbox and clutch of the Fiat 500 1.2.
Disassembly of the gearbox and clutch of the Fiat 500 1.2.
Fiat 500 (2007-2024 / 312) The main steps of today will show us how to dismantle the gearbox and how to replace the clutch assembly of the Fiat 500 1.2. First, we lift the vehi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos