Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gearbox on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

In today's tutorial video, we will see how to remove and replace the gearbox and clutch on a Fiat 500 1.2, following the instructions below. First, lift the vehicle and start by removing the lower engine cover; then remove the engine mount located under the battery to lower the engine slightly and work on the gearbox.

Once the front bumper is removed, proceed to disconnect the gearbox from the transmission by unscrewing all the bolts; then remove and replace the clutch, following the video to the end!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Oil Change for Fiat 500 Gearbox
Oil Change for Fiat 500 Gearbox
Fiat 500 (2007-2021 / 312) Lift the car and remove the 12 mm bolt that acts as the plug for the manual gearbox drain hole. Then, unscrew the T6 Torx screw indicated in the vide…
Disassembly of the gearbox and clutch of the Fiat 500 1.2.
Disassembly of the gearbox and clutch of the Fiat 500 1.2.
Fiat 500 (2007-2024 / 312) The main steps of today will show us how to dismantle the gearbox and how to replace the clutch assembly of the Fiat 500 1.2. First, we lift the vehi…
Guide to Removing the Gearbox of the Fiat 500
Guide to Removing the Gearbox of the Fiat 500
Fiat 500 (2007-2024 / 312) Today's main instructions will show you how to remove and replace the gearbox and clutch of the Fiat 500. First, raise the vehicle and begin by remov…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos