Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the injectors of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Fuel injectors

In order to replace the injectors of the Fiat 500, you need to open the hood, so that you can have access to the components located inside the engine compartment: it will be necessary to remove the plastic cover of the upper part of the engine block, in order to have access to underlying components. Here there will be the fuel hoses, which will have to be disconnected in order to be able to extract the injectors from their housings: these will have to be removed by loosening the fixing bolts. After removal it will be possible to insert the new ones, connecting them and fixing them appropriately.

Posted on 21 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the injectors of the Fiat 500
How to replace the injectors of the Fiat 500
Fiat 500 (2007-2022 / 312) In today's video we see how to replace the injectors in the Fiat 500 LPG. Specifically, this operation is necessary when your car has an irregular id…
How to change the injectors of the Fiat 500 1.3 Multijet
How to change the injectors of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2022 / 312) Today we will see, in this video tutorial, how to disassemble and replace the diesel injectors of the Fiat 500 1.3 Multijet. First we open the bonnet…
How do you replace the spark plugs on the Fiat 500 Abarth?
How do you replace the spark plugs on the Fiat 500 Abarth?
Fiat 500 (2007-2022 / 312) The spark plugs of the Fiat 500 Abarth are replaced by opening the bonnet and unscrewing the screws that fix the plastic cover of the upper part of t…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos