Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Scheduled maintenance on a 595 Abarth

Model: Fiat 500 - Years 2007-2021
Part: Oil filter

This video explains the fundamental steps involved in the scheduled maintenance for a 595 Abarth. As the first step, every year or every 6,200/9,300 miles, it is advisable to change the engine oil and its filter, with Abarth workshops recommending Selenia 10W50 oil, which has a viscosity suitable for the TJet engine. After each oil change, check the air filter, replacing it if necessary; otherwise, just clean it with air. Periodically check the condition of the windscreen wiper blades, the radiator fluid, and the condition of the tyres, which should be changed approximately every 25,000 miles. Also, check the battery, which should be replaced every 5 years, and the timing belt every 10 years or 62,000 miles.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Discover When to Service a Fiat 595 Abarth?
How to Discover When to Service a Fiat 595 Abarth?
Fiat 500 (2007-2024 / 312) In this video, see how to check the countdown for servicing on a Fiat Abarth 595 with a digital instrument cluster. On the left side of the dashboard…
How to View and Reset Trip Data on a Fiat Abarth 595
How to View and Reset Trip Data on a Fiat Abarth 595
Fiat 500 (2007-2024 / 312) On the Fiat Abarth 595, trip data is managed via the "trip" button located at the end of the right-hand steering wheel stalk. To view the information…
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2012-2023 - Where is the Fiat 500 L oil filter located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos