Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : How to reset the oil light on the Fiat Freemont

Fiat Freemont - Video tutorial

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: -board computer
Operation: How to reset the oil light on the Fiat Freemont

If you have just changed the engine oil in your Fiat Freemont, you must also carry out the manual reset in order to definitively eliminate the relative warning light from the on-board display. First make sure you start the whole procedure with the car completely off and with the doors closed. Then press the "Start/Stop" button twice in succession and keep both the brake pedal and the accelerator pedal pressed. As soon as a message appears on the display confirming that the reset has taken place, release the pedals and switch off the ignition.


Posted on 20 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Freemont 2011-2016 - What does the orange light on the engine of the Fiat Freemont 2011 indicate? Read Answer
    • Freemont 2011-2016 - How to reset the service on the Fiat Freemont? Read Answer
    • Freemont 2011-2016 - How to reset the Uconnect system in the Fiat Freemont? Read Answer
    • Freemont 2011-2016 - What is the ETC warning light in the Fiat Freemont? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos