Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Fiat 500 1.4 MultiAir

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
This video is currently unavailable

This guide outlines the main steps to remove and replace the timing belt on the Fiat 500 1.4 MultiAir. First, lift the vehicle and remove the front right wheel; then remove the wheel arch liner and take off the serpentine belt by loosening the tensioner, as shown in the video.

Next, remove the left engine mount (from the engine bay) and take off the timing cover; then proceed to remove and replace the old toothed belt with the new one, following the video tutorial to the end!


Updated on 23 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Water Pump and Timing Belt on a Fiat 500 1.2
Guide to Replacing the Water Pump and Timing Belt on a Fiat 500 1.2
Fiat 500 (2007-2024 / 312) In this guide, you will see the main instructions on how to remove and replace the water pump and timing belt on a Fiat 500 1.2. First, open the bonn…
Replacing the starter motor of the Fiat 500 Multiair
Replacing the starter motor of the Fiat 500 Multiair
Fiat 500 (2007-2022 / ) Today, we will go through the main steps to remove and replace the starter motor of the Fiat 500 with a Multiair petrol engine. First, open the bonne…
How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos