Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Spark Plug Leads

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Engine

To carry out this maintenance, first ensure the engine is cold to avoid unpleasant burns. To access the spark plug leads, you must first remove the air filter housing by detaching the support spring from the exhaust manifold and unscrewing the two fixing bolts. Once the filter box is removed, disconnect the lead from the spark plug and the ignition coil, and free the lead so you can pull it out, then proceed in reverse for the installation of the new one. Repeat the same step for replacing the other leads.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
Fiat Punto (1999-2011 / MK 2, 188) Today, we will see, in this brief and simple guide, the instructions to disassemble and replace the spark plugs and ignition leads on a Fiat Punto 1.…
Spark Plug Replacement Instructions
Spark Plug Replacement Instructions
Fiat Punto (1999-2011 / MK 2, 188) Before proceeding with the spark plug replacement, wait for the engine to cool down; then remove the air filter box, disconnect the spark plug leads,…
How to Fit Spark Plugs in Your Car
How to Fit Spark Plugs in Your Car
Fiat Punto (1993-1999 / MK 1, 176) The spark plugs of a car are very important components of the ignition system and are part of the ignition organs of the internal combustion engine. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos