Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Warning Light on a Fiat 500

Model: Fiat 500 - Years 2007-2022
Part: Service warning light

This guide provides instructions on how to reset the engine oil warning light that appears on the dashboard of a Fiat 500. First, get into the vehicle and press the accelerator pedal three times within ten seconds. Then, turn the ignition key to position one and wait for the service light to start flashing until it resets on the dashboard, as shown in the video. At this point, turn off the ignition and then start the engine, checking that the light has reset correctly!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Warning Light on the Fiat 500 X
How to Reset the Engine Oil Warning Light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
How to Reset the Service Light (Oil Change) on a Fiat 500 X
How to Reset the Service Light (Oil Change) on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, learn the steps to reset the service light for the oil change maintenance on a Fiat 500 X. First, get inside the vehi…
How to reset the oil light on the 2012 Fiat 500
How to reset the oil light on the 2012 Fiat 500
Fiat 500 (2007-2024 / 312) To manually reset the engine oil light of your Fiat 500 (2012), simply follow the steps described in the following guide. First, go inside the car an…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos