Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Driver's Airbag in a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Airbag

In this tutorial, you will see how to replace the driver's airbag in a Fiat 500, an extremely simple and quick operation. Before proceeding, open the bonnet and disconnect the negative terminal of the battery to avoid accidental activation of the airbag. Start by sitting in the driver's seat, then locate the hole at the back of the steering wheel, in the lower area, insert a screwdriver into it, and press firmly. At this point, grasp the airbag, separate it from the steering wheel, and disconnect the power connector. To fit the replacement, just follow the reverse procedure.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) Today I will explain how to remove the airbag from the steering wheel of the Fiat 500 L. To remove the airbag, we need to insert a flathead screwdriv…
Fiat 500 (2014-2022 / 500 X) Today we will explain how to remove the steering wheel airbag from the Fiat 500 X. To remove the airbag, we need to insert a flat-head screwdriver in…
Fiat 500 (2007-2021 / 312) How do you remove the airbag from a Fiat 500? Here’s how to take off the airbag from above the steering wheel. Enter the cabin, locate the holes behi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos